VideoJet 10
Single channel MPEG-4
Video Transmitter or Receiver
The VideoJet 10 with MPEG-4
encoding provides high quality real time video
pictures at 30 frames per second with audio on
very low bandwidth.
For flexibility the VideoJet
10 single channel codec comes with various
combinations of interfaces - LAN as standard and ISDN as
an option, as well as a CompactFlash port which will take a wireless LAN
card or a range of different systems for local
recording, including Microdrive solutions.
The video signal can be
received and displayed with a standard browser,
decoder software, or in a box to box hardware
solution.
The VideoJet 10 supports the
remote control of all popular PTZ cameras, domes
and multiplexers, includes a sophisticated
motion detector, professional alarm management
and control features, as well as an alarm input,
a relay output and two serial data ports.
Highlights
-
1 channel standalone encoder or decoder
- MPEG-4 standard @
704x288x30 frames per second
- M-JPEG @ 720x576/480 pixel
- FastEthernet, or ISDN
interface
- CompactFlash port for wLAN
or local recording (CF card or Microdrive)
- Comprehensive security
features
- Multicast & Streaming
- 1 alarm input, 1 analogue
sensor input & 1 relay output
- 2 serial data ports for
peripheral control
- Power supply via LAN
Technical
Data
Video Standard
MPEG-4 (ISO/IEC 14496), M-JPEG
Audio Standard
G.711; 300Hz - 3.4KHz
Video Data Rate
9.6 kBit/s - 4 MBit/s (MPEG-4)
Audio Data Rate
64 kBit/s
Video Encoder/Decoder
720x576/480 full D1: 7 fps
704x576 4CIF: 7fps
704x288 2CIF: 14 fps
352x576/480 half D1: 30 fps
352x288 CIF: 30 fps
176x144 QCIF: 30 fps
Low latency mode < 150 ms
Audio Encoder/Decoder
Sampling rate: 8kHz
Network Protocols
RTP, RTCP, UDP, TCP, IP, HTTP, IGMP, ICMP, ARP,
DHCP, SNMP
Software Update
Flash ROM, remote programmable
Configuration
Via web browser, built-in web server
Local RS232/422/485 port
Video In (Encoder)
1x
Analogue Composite: NTSC or PAL
BNC connector 75ohm switchable, 0.7 - 1.2 Vpp
Video Out (Decoder)
1x
Analogue Composite: NTSC or PAL
BNC connector 75ohm switchable, 1 Vpp
Audio In
1x mono line, stereo jack 3.5mm, 1 Vpp, 50kohm
Audio Out
1x mono line, stereo jack 3.5mm, 1 Vpp, 60mW,
min 8ohm
Trigger Input
1 x clamp (non-isolated closure contact type),
max 24V, max activation resistance 10ohm
Relay Output
1x clamp, 30 Vpp, 1A
Analogue Sensor Input
0-5 VDC general purpose analogue input (e.g.
temperature sensor)
COM-Ports
1 x RS232/422/485, 9-pin Sub-D
1 x RS232, 9-pin Sub-D
Ethernet
10/100 Base-T, autosensing, half/full duplex,
RJ45
ISDN (option)
RJ45, S0-Basic-rate
Wireless Ethernet
RF-interface 802.11b via CF card interface
Storage Media
CompactFlash card, Microdrive
Input Voltage
12 - 24 VDC, power adapter included
Power Consumption
Approx. 10VA
Weight
Approx 0.6 kg
Operating Temperature
0 - 50 C ambient temperature
Humidity
20 - 80%, atmospheric humidity (non condensing)
Approvals
IEC 60950; UL1950; J60950; AS/NZS 3260; EN
55103-1,-2; EN 55130-4; EN 55022; EN 55024; EN 61000-3,-2;
EN 61000-3,-3, FCC 47 CFR Ch. 1 Part 15
Contents of delivery
- VideoJet 10 Server
including plug-in power supply
- RS232 null modem cable;
ISDN or Modem cable (only with respective
version)
- Brief description "Quick
Installation Guide"
- CD-Rom with decoder
software and manual
Downloads
VideoJet 10
Ethernet Datasheet (197KB)
VideoJet 10
ISDN Datasheet (211KB)
VideoJet 10
Manual (1,514KB)
SLD
Security & Communications
The Old Forge, Ockham Lane
Ockham, Surrey
GU23 6PH
England
Tel: +44.1483225633
Fax: +44.1483225634
|
